Clarion Z3 Full Digital Sound Processor

Sound processor
Analogue output 4Vrms (VOL 0db)
S/N 110dB (A filter)
Harmonic Distortion 0.01％
Analogue input RCA input, Speaker level input
Input sensitivity

 Low: RCA-in=4Vrms/power-in=8Vrms
Mid: RCA-in=2Vrms/power-in=4Vrms
High: RCA-in=1Vrms/power-in=2Vrms
Digital coaxial input 0.5Vp-p/75Ω, Up to 96kHz/24Bit/PCM
Digital optical input Up to 96kHz/24Bit/PCM
Power Supply 10.8 ～15.6V DC, Negative ground
Current Consumption Maximum 15A
Weight 660g
Dimensions 180（W）×37（H）×116（D）mm

Commander (Supplied with Z3)
Weight 385g
Dimensions 100（W）×27(H）×46（D）mm

Tweeter (Supplied with Z3)
＜ Driving section ＞
Maximum output 9W (4.5W × 2 Driver)× 2ch
Rated output 6W(3W × 2 Driver)× 2ch at 1% THD+N
＜Speaker section＞
Impedance 6Ω × 2ch
Frequency response 1.5kHz ～ 40kHz
Weight (One speaker) 77g
Dimensions 40（W）×40（H）×21.5（D）mm

Commander (Supplied with Z3) Operation command list
Settings Adjustment method
Commander Tuning application
Main VOL －99dB ～ 0dB（ 1dB step） ○ -
SW VOL －10dB ～ +10dB（ 0.5dB step） ○ -
Memory select Custom memory 1 / Custom memory 2 /
Custom memory 3 / Custom memory 4（4 Patterns） ○ ○
Intelligent
Tune

 Sound Restorer OFF / Low / Mid / High ○ ○
Virtual Bass OFF / Low / Mid / High ○ ○
Tone Filter Vivid +2 / Vivid +1 / OFF / Vintage +1 / Vintage +2 ○ ○
Reverb Control OFF / Low / Mid / High ○ ○
Balance Left 12 ～ Center ～ Right 12 ○ -
Fader Rear 12 ～ Center ～ Front 12 ○ -
Source (Input setting) Digital optical / Digital coaxial / Analog / USB ○ -
Audio Sense Low / Mid / High ○ -
Brightness OFF / Level 1 ～ 10 ○ -
Beep ON / OFF ○ -

Main supplied items
Sound Processor
Commander (2.46m)
Tweeter kit
Power cable (2.5m) * Grounding cord (2m)
Speaker input cable (2m)
USB cable A (0.5m)
USB cable B (0.15m)
＜ Tweeter kit >
Tweeter × 2
Mount adapter × 2
Flush-mount spacer × 2
Lever arm × 2
Z3 output cord (0.3m)
Extension cord (3m) × 2